This is the "standard" cabinet which fits the ESP32-POE board, the daughterboard and one sensors, with holes for screws, usb and ethernet and a grill on top for colling.
The OpenSCAD files is parameterized.
At some point we will probably open up Github-account or something like it, but as long as i am the only/primary developper it is not prioritized and downloads will be available on this page.
We are still working on this release, and it will be updated without warning. We don't recomend production usage until you see a final relase on this page.
The goal for this version is to have a usable cabinat, a daughterboard for both internal and remote sensor and software that will display the probe on a website that auto-updates in a browser, json output and and prometheus metrics.
Content | Version | Last updated | Download link |
---|---|---|---|
OpenSCAD + Redered STL files for casing
This is the "standard" cabinet which fits the ESP32-POE board, the daughterboard and one sensors, with holes for screws, usb and ethernet and a grill on top for colling. The OpenSCAD files is parameterized. |
21.0Alpha_01 | 2024-04-01 12:00 | Download |
Kicad + Rendered Gerber and drill files for daughterboard
This is the "standard" daugherboard for one single temperature sensor, this is one of the things the most likely will be expanden uppon and gets its own designation in the future. |
1.0Alpha_01 | 2024-04-01 12:00 | Download |
Firmware source for use with Arduino IDE
This version of the software will listen for a single one-wire sensor on gpio pin number 8, read it out and make it available through the webinterface both as a browseable website, a json structure and Prometheus metrics. |
1.0Alpha_01 | 2024-04-01 12:00 | No download yet |
Grafana Dashbord for use with Prometheus
The OpenSensie has a built in Prometheus Exporter, so all you need to do is to point your Prometheus to your OpenSensie and install this dashboard in order to monitor your sensors. |
1.0Alpha_01 | 2024-04-01 12:00 | No download yet |
NRPE Module for Nagios / Incinga and combatible monitoring systems
This download contains three versions of the NRPE Module written in Perl, PHP and Python, which allows you to use the one who best fits your montioring environement. |
1.0Alpha_01 | 2024-04-01 12:00 | No download yet |
This is the "standard" cabinet which fits the ESP32-POE board, the daughterboard and one sensors, with holes for screws, usb and ethernet and a grill on top for colling.
The OpenSCAD files is parameterized.
This is the "standard" daugherboard for one single temperature sensor, this is one of the things the most likely will be expanden uppon and gets its own designation in the future.
This version of the software will listen for a single one-wire sensor on gpio pin number 8, read it out and make it available through the webinterface both as a browseable website, a json structure and Prometheus metrics.
The OpenSensie has a built in Prometheus Exporter, so all you need to do is to point your Prometheus to your OpenSensie and install this dashboard in order to monitor your sensors.
This download contains three versions of the NRPE Module written in Perl, PHP and Python, which allows you to use the one who best fits your montioring environement.
If you want to try the OpenSensie but don't know where to start, please read our Getting started guide.